Lots going on

[Spittybug]

EFI is progressing, manifold adaptor is being welded by a friend. Fuel rails done, injectors and temp sensor purchased, pigtails all procured. Need to get a fuel regulator and gauge. Megasquirt assembly is giving me grief; looks like I got a bum chip. Voltages and continuity on board look correct; connect it to laptop and get streams of jibborish. Working with DIY to resolve.

Separately, still trying to make the attached photo a reality. Harder than it looks to embed it into the center of the steering wheel! Tried carving out the center rubber... no dice. Tried foaming in place to then cover with vinyl... no dice... now considering mounting GPS and then "cowling" with paper mache cover, covering with vinyl. We'll see. Too much going on. EFI has top priority.